Stand-Bot for Slack + Jira Integration

Stand-Bot for Slack helps teams run asynchronous stand-up meetings in Slack & create daily Jira status reports.

To get started with our app and begin running stand-ups in Slack, please take a look at our documentation.

1. Stand-bot for Slack

Installation


  • Click on "Authorize" to allow Stand-Bot to join your Slack workspace.

  • Add Stand-Bot to a channel and you're ready to go!

Setting up a stand-up

Once you've added Stand-Bot to your Slack workspace, you can go ahead and create a stand-up.

  • Go to the channel in which you want to setup up a stand-up and add Stand-bot.


  • He'll introduce itself and ask you if you want to configure a stand-up. Click on "Yes". 


  • Stand-bot will ask you for the time of the stand-up. He'll create the stand-up in your timezone.


  • Input the time you want to have your stand-up.


  • Select the recurrence of your stand-up. 


  • Input the username of the team's Scrum Master or type "me" if it's you.


  • If everything is okay with your configuration, click on "Yes".


  • Once you confirm, you're stand-up will be ready!


Stand-bot will send a reminder to each member of the channel to send their status once it's stand-up time.

Commands

You can fin a list of Stand-bot's commands here.

  • Channel commands

    Stand-bot responds to the following commands inside a Channel.

Command

Description

@standbot setup

Create a stand-up for your channel. Set time and periodicity.

@standbot info

See stand-up's details.

@standbot status

Get a status report of the team.

@standbot status @username

See a team member's status.

@standbot blockers

Find out if your team has any blockers.

@standbot blockers @username

Check if specific participants have impediments.

@standbot skip @username

Skip yourself or a teammate from the stand-up.

@standbot unskip @username

Disable a teammate’s skip mode.

@standbot end-standup

Delete your recurring stand-up.

nevermind

Stop an ongoing conversation with Stand-bot.


  • DM commands

    You can use the following commands through Direct Message with Stand-bot.

Command

Description

standup

Give Stand-bot your status.

status

See your team's status report.

edit

Make changes to your sent status.

delete

Remove your sent status for the day.

connect-jira

Link Slack workspace to Jira.

connect-jira-user

Authenticate your Jira credentials.

nevermind

Stop an ongoing conversation with Stand-bot.

2. Jira integration

Installation

You will know when installation is ready as Atlassian marketplace would display a success message at the button of the page.

Linking your Slack workspace to your Jira instance

  • Once you've installed the app on your Jira instance, go to 'My Apps' in the top menu.

  • On the left menu click on 'Manage Apps' where you will find the Stand-Bot listed.


  • Click on the Stand-Bot listed app to expand the details, and then click on the 'Configure" button to link your Jira instance to your Slack workspace.


It is recommended that you first install the Slack app in your workspace from the Standup Slack Directory before continue to the next steps.


  • After clicking on the 'Configure' button you'll be sent to the Verification Team page in which you must input the name of your Slack workspace and click on "Verify Team". This may take a few seconds, don't worry if it takes a bit. 

Note: You should have Stand-bot already installed in your Slack workspace for this verification to work.


  • Right after the verification, you'll see a confirmation message if the verification goes smoothly.


  • If you installed Stand-bot on Slack, he will send you the following message through Direct Message:

Note: If someone else from your workspace installed Stand-Bot on Slack, use the command "connect-jira" through DM with Stand-bot. It will prompt the Jira connection flow.


  • Click "Yes" to confirm that you want to link Jira with your Slack workspace. After clicking "Yes", Stand-bot will add a link that reads "Verify your team". Click on it.



  • You will be taken to this screen in Jira.


  • Click on "Confirm" to link Jira with your Slack workspace.



  • Once you do, you'll be able to Match your Jira projects to your #channels in Slack.


Matching Jira projects to Slack channels

  • Once you've linked Jira to your Slack workspace and created your standups in Slack channels, you can go back to the 'Manage Apps' section, click on the Stand-Bot element, and click on the Configure button.


  • This time, you'll be taken to this screen where you'll see all the channels in Slack with configured stand-ups. 


  • To match a Project to a Channel, open the menu on the Channel you want to configure and select the Jira project you'd like to link to it.


  • Once you're done matching Projects to Channels click on "Save". You will now be able to save your Stand-up Reports inside your Jira projects and see your Jira tickets when giving your status.


Now you'll just need to get your team to verify their accounts. 

Verifying teammates' Jira users

  • Whenever you match a Jira Project to a Slack channel with a running stand-up, the bot will send a message to the channel's members:


  • They will need to click on "Yes". Once they do, they'll see a link that reads "Verify your Jira account".


  • They need to click on it to be taken to Jira, where they will see the following screen:


  • They'll have to click on "Confirm".


  • Once they do, they'll see the following screen and will be able to see their Jira tickets when giving their stand-up status.


Seeing your Jira tickets when giving your status

Once you've verified your Jira user, you'll be able to see your Jira tickets during your stand-up.

  • Wait for the bot to ask you for your status or use the "standup" command to send it.


  • Stand-Bot will show the option to see the Jira tickets you have "Assigned", those in "To Do", and in "Done".


  • Select the type of Jira tickets you want to see first. Stand-Bot will display the 5 most recently updated in that category.


  • You can take a look at another category by clicking on it.


  • Once you've seen the categories that interest you, click on "None for now" to start typing your status.



Viewing your stand-up reports in Jira

Once you install the Jira add-on, you'll be able to view the history of your stand-up reports inside each project you linked to a channel.

  • To do so, go to a Project you've linked to a stand-up and click on "Stand-up Reports" on the left sidebar menu.


  • You will see your team's status for the day as team members send their status.


  • You will also be able to navigate through your stand-up history to see past reports.

On this page: